Cadillac 2002 Escalade Owner'S Manual Download Page 285

Page: 285 / 417

5-21

Removing the Spare Tire and Tools

The equipment is located under the rear seat behind the
driver’s seat and behind the left trim panel in the rear
of the vehicle.

Under Second Row Passenger’s Seat on Driver’s Side

A. Tool Kit with Jack

Tools and Gloves

B. Bracket and

Wing Nut

There is a wing nut (B) used to retain the tool kit (A).
To remove it, turn the wing nut counterclockwise.

Rear Access Panel

A. Speaker
B. Bottle Jack
C. Wing Nut

D. Retaining Hook
E. Wheel Blocks
F. Cover Panel

To release the bottle jack (B) from its holder,
turn the knob on the bottle jack counterclockwise
to lower the jack head.

The wheel blocks (E) and the wheel block
retainer can be removed by turning the wing
nut (C) counterclockwise.

You’ll use the jack handle extensions and the wheel
wrench to remove the underbody

mounted spare tire.

Summary of Contents for 2002 Escalade

































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Escalade

Reviews:

Related manuals for 2002 Escalade

Brands by name

Popular brands

Cadillac 2002 Escalade, Owner'S Manual

Search results

Summary of Contents for 2002 Escalade

Reviews:

Related manuals for 2002 Escalade

Brands by name

Popular brands