manualshive.com logo in svg

Cadillac 2002 Escalade, Owner'S Manual

The Cadillac 2002 Escalade owner's manual is essential for every Cadillac owner. Experience hassle-free car maintenance with our downloadable manual, providing comprehensive instructions and insights. Find your free Cadillac 2002 Escalade owner's manual download at manualshive.com and unleash the full potential of your vehicle's features and performance.

Share
Download
background image

2-70

When one of the warning lights comes on and stays on
when you are driving, or when one of the gages shows
there may be a problem, check the section that tells you
what to do about it. Please follow this manual’s advice.
Waiting to do repairs can be costly 

--

 and even

dangerous. So please get to know your warning 
lights and gages. They’re a big help.

Your vehicle also has a message center that works 
along with the warning lights and gages. See “Message
Center” in the Index.

Safety Belt Reminder Light

When the key is turned to RUN or START, a chime 
will come on for about six seconds to remind people to
fasten their safety belts, unless the driver’s safety belt is
already buckled.

The safety belt light will
also come on and stay on
for about 20 seconds, 
then it will flash for 
about 55 seconds.

If the driver’s belt is already buckled, neither the chime
nor the light will come on.

Air Bag Readiness Light

There is an air bag readiness light on the instrument
panel, which shows the air bag symbol. The system
checks the air bag’s electrical system for malfunctions.
The light tells you if there is an electrical problem. 
The system check includes the air bag sensors, the 
air bag modules, the wiring and the crash sensing and
diagnostic module. For more information on the air bag
system, see “Air Bag” in the Index.

This light will come on
when you start your vehicle,
and it will flash for a few
seconds. Then the light
should go out. This means
the system is ready.

If the air bag readiness light stays on after you start 
the vehicle or comes on when you are driving, your 
air bag system may not work properly. Have your
vehicle serviced right away.

Summary of Contents for 2002 Escalade


































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Escalade

RaceChip XLR User Manual preview
XLR
Brand: RaceChip Pages: 20
FAAFTECH FT-VF-HND2 Installation Manual preview
FT-VF-HND2
Brand: FAAFTECH Pages: 8
AutoMaxi AXIS XXL Instructions preview
AXIS XXL
Brand: AutoMaxi Pages: 2
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
Toro 137-1019 Installation Instructions Manual preview
137-1019
Brand: Toro Pages: 24
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
Boyo VTL17LTJ Manual preview
VTL17LTJ
Brand: Boyo Pages: 9
Kia Sorento Owner'S Manual preview
Sorento
Brand: Kia Pages: 51
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
SNIPER V2 Inox Owner'S Manual preview
V2 Inox
Brand: SNIPER Pages: 2
Volvo S90 - ACCESSORY PANEL Owner'S Manual Supplement preview
S90 - ACCESSORY PANEL
Brand: Volvo Pages: 166
RAM Promaster 2016 User Manual preview
Promaster 2016
Brand: RAM Pages: 148
Hamron 619-626 User Instructions preview
619-626
Brand: Hamron Pages: 36
ACV 381190-37-1 Installation Manual preview
381190-37-1
Brand: ACV Pages: 2
Arctic Cat 2010 ATV 150 Service Manual preview
2010 ATV 150
Brand: Arctic Cat Pages: 101
Toyota 2009 Tacoma Quick Reference Manual preview
2009 Tacoma
Brand: Toyota Pages: 22
Pinnacle EPL7SAM+C Series Quick Start Manual preview
EPL7SAM+C Series
Brand: Pinnacle Pages: 2

Brands by name

Popular brands

Load more brands