manualshive.com logo in svg

Cadillac 2002 Escalade, Owner'S Manual

The Cadillac 2002 Escalade owner's manual is essential for every Cadillac owner. Experience hassle-free car maintenance with our downloadable manual, providing comprehensive instructions and insights. Find your free Cadillac 2002 Escalade owner's manual download at manualshive.com and unleash the full potential of your vehicle's features and performance.

Share
Download
background image

3-7

Air Conditioning

On hot days, open the windows long enough to let hot
air inside escape. This reduces the time it takes for your
vehicle to cool down. Then keep your windows closed
for the air conditioner to work its best.

The A/C button, below the mode knob, allows the air
coming into your vehicle to be cooled. This setting is
useful for normal cooling on hot days. When you use
A/C with the recirculation button pressed in, turn off
recirculation as soon as the vehicle reaches a
comfortable interior temperature.

Using A/C with the recirculation setting active allows
the air inside your vehicle to be recirculated. This
setting helps to maximize your air conditioner’s
performance and your vehicle’s fuel economy. This
setting also cools air the fastest and can be used to keep
unwanted odors and/or dust from entering the vehicle.
When using the air conditioner, turn off the recirculation
setting and use the outside air setting after the vehicle
reaches a comfortable interior temperature. When the
right knob on the control panel is between floor and
defrost, the recirculation feature will not function to
reduce window fogging.

Passenger Compartment Air Filter

Your vehicle is equipped with a passenger compartment
air filter, which filters outside air entering the vehicle.
For information on replacing the filter see “Passenger
Compartment Air Filter” in the Index.

Heating

The heater works best if you keep your windows closed
while using it. On cold days, use the floor setting with
the temperature knob in the red area.

On cold days, approximately 32

_F (

-

0

_C) or lower, 

you may experience differences in how the transmission
shifts until the engine is warm. This feature
automatically reduces the time it takes for the engine to
reach normal operating temperature and shortens the
time it takes the heater to reach full output.

If you use the engine coolant heater before starting your
engine in cold weather, 20

_F (

-

8

_C) or lower, the

heating system will produce warmer air faster to heat the
passenger compartment.

The use of an engine coolant heater also reduces the
time it takes for the engine to reach normal operating
temperature. For more information, see “Engine Coolant
Heater” in the Index.

Summary of Contents for 2002 Escalade


































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Escalade

LaserTrack Flare Installation Manual preview
Flare
Brand: LaserTrack Pages: 12
VanEssa mobilcamping V1 User Instruction preview
V1
Brand: VanEssa mobilcamping Pages: 8
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
Jaeger 12020523 Fitting Instructions Manual preview
12020523
Brand: Jaeger Pages: 11
ULTIMATE SPEED 285690 Assembly And Safety Advice preview
285690
Brand: ULTIMATE SPEED Pages: 10
Edelbrock 2917 Nstallation Instructions preview
2917 Nstallation
Brand: Edelbrock Pages: 1
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4
Seat Toledo 2019 Owner'S Manual preview
Toledo 2019
Brand: Seat Pages: 300
AUTOTECH 10.297.300K-303K Installation Instructions preview
10.297.300K-303K
Brand: AUTOTECH Pages: 1
INNO TR163 Installation Instructions preview
TR163
Brand: INNO Pages: 3
Jaeger 21360505J Fitting Instructions Manual preview
21360505J
Brand: Jaeger Pages: 13
Funkwerk EGO FLASH Operating Manual preview
EGO FLASH
Brand: Funkwerk Pages: 58
Racepak 250-DS-123 Quick Start Manual preview
250-DS-123
Brand: Racepak Pages: 17
Chevrolet 2005 Epica Owner'S Manual preview
2005 Epica
Brand: Chevrolet Pages: 340
Chevrolet 2005 Equinox Owner'S Manual preview
2005 Equinox
Brand: Chevrolet Pages: 364
Honda 2014 Accord EX Technology Reference Manual preview
2014 Accord EX
Brand: Honda Pages: 15

Brands by name

Popular brands

Load more brands