background image

8-9

Public Transportation or Fuel Reimbursement

If your vehicle requires overnight warranty repairs,
reimbursement up to $30 per day (five days maximum)
may be available for the use of public transportation
such as taxi or bus. In addition, should you 
arrange transportation through a friend or relative,
reimbursement for reasonable fuel expenses up to 
$10 per day (five day maximum) may be available.
Claim amounts should reflect actual costs and be
supported by original receipts.

Courtesy Rental Vehicle

When your vehicle is unavailable due to warranty repairs,
your dealer may arrange to provide you with a courtesy
rental vehicle or reimburse you for a rental vehicle you
obtained, at actual cost, up to a maximum of $37.00 per
day supported by receipts. This requires that you sign and
complete a rental agreement and meet state, local and
rental vehicle provider requirements. Requirements vary
and may include minimum age requirements, insurance
coverage, credit card, etc.

You are responsible for fuel usage charges and may also
be responsible for taxes, levies, usage fees, excessive
mileage or rental usage beyond the completion of 
the repair.

Generally it is not possible to provide a like

-

vehicle as 

a courtesy rental.

Additional Program Information

Courtesy Transportation is available during the
Bumper

-

to

-

Bumper warranty coverage period, 

but it is not part of the New Vehicle Limited Warranty.
A separate booklet entitled “Warranty and Owner
Assistance Information” furnished with each 
new vehicle provides detailed warranty 
coverage information.

Courtesy Transportation is available only at
participating dealers and all program options, such as
shuttle service, may not be available at every dealer.
Please contact your dealer for specific information about
availability. All Courtesy Transportation arrangements
will be administered by appropriate dealer personnel.

Summary of Contents for 2002 Escalade


































































































































































































































































































































































































































Reviews: