manualshive.com logo in svg

Cadillac 2002 Escalade, Owner'S Manual

The Cadillac 2002 Escalade owner's manual is essential for every Cadillac owner. Experience hassle-free car maintenance with our downloadable manual, providing comprehensive instructions and insights. Find your free Cadillac 2002 Escalade owner's manual download at manualshive.com and unleash the full potential of your vehicle's features and performance.

Share
Download
background image

4-59

Parking on Hills

CAUTION:

You really should not park your vehicle, with a
trailer attached, on a hill. If something goes
wrong, your rig could start to move. People can
be injured, and both your vehicle and the trailer
can be damaged.

But if you ever have to park your rig on a hill, here’s
how to do it:

1. Apply your regular brakes, but don’t shift into

PARK (P) yet.

2. Have someone place chocks under the trailer wheels.

3. When the wheel chocks are in place, release the

regular brakes until the chocks absorb the load.

4. Reapply the regular brakes. Then apply your parking

brake and shift into PARK (P).

5. Release the regular brakes.

When You Are Ready to Leave After
Parking on a Hill

1. Apply your regular brakes and hold the pedal down

while you:
D start your engine,
D shift into a gear, and
D release the parking brake.

2. Let up on the brake pedal.

3. Drive slowly until the trailer is clear of the chocks.

4. Stop and have someone pick up and store the chocks.

Maintenance When Trailer Towing

Your vehicle will need service more often when you’re
pulling a trailer. See the Maintenance Schedule for more
on this. Things that are especially important in trailer
operation are automatic transmission fluid (don’t
overfill), engine oil, axle lubricant, belt, cooling system
and brake system. Each of these is covered in this
manual, and the Index will help you find them quickly.
If you’re trailering, it’s a good idea to review these
sections before you start your trip.

Check periodically to see that all hitch nuts and bolts 
are tight.

Summary of Contents for 2002 Escalade


































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2002 Escalade

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Dynojet 24xLC2 Linx Installation Manual preview
24xLC2 Linx
Brand: Dynojet Pages: 68
Kuda-Phonebase 283410 Installation Instruction preview
283410
Brand: Kuda-Phonebase Pages: 3
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
tams elektronik 54-01016 Manual preview
54-01016
Brand: tams elektronik Pages: 44
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
ULTIMATE SPEED 285690 Assembly And Safety Advice preview
285690
Brand: ULTIMATE SPEED Pages: 10
rough country RCH5100 Installation Instructions preview
RCH5100
Brand: rough country Pages: 4
Volvo S40 2001 Owner'S Manual preview
S40 2001
Brand: Volvo Pages: 197
Conrad TPMS-001 Operating Instructions Manual preview
TPMS-001
Brand: Conrad Pages: 8
Hollywood Racks HR4000 Assembly And Instruction Manual preview
HR4000
Brand: Hollywood Racks Pages: 8
Discount Car Stereo AUX-FB Quick Start Installation Manual preview
AUX-FB
Brand: Discount Car Stereo Pages: 4
Thule 1299 Instructions Manual preview
1299
Brand: Thule Pages: 12

Brands by name

Popular brands

Load more brands