Cadac CDC five_02-01-2020_Rev-7.docx
Page. 62 / 78
In the screen below the 3 elements within each effect slot can be arranged in either series or parallel,
and in any order, by simply ‘dragging and dropping’ the required component. By default the effects are
stereo units, however by pressing STEREO deselects the stereo mode and reconfigures the effects to
mono, allowing the Left and Right to be used as separate units.
42: FX build screen - select the element (a choice of reverb, delay and modulation)
and drag and drop into it
one of the possible 9 “slots”
A Waves
®
interface card is also fitted as standard which provides direct, low latency connectivity to the
Waves
®
MultiRack
®
server, allowing additional effects to be used in conjunction
with the console’s own
DSP effect options.
The FX
element is
selected
from 3
choices at
the bottom
of the FX
configuration
window
STEREO by
default,
deselect this
for MONO