Cadac CDC five_02-01-2020_Rev-7.docx
Page. 54 / 78
The default source for the bar graph meters is POST FADER, but this may be changed to PRE FADER
on the MENU s
creen’s METER OPTIONS page. By default the on-screen meters and the BUS
FOLLOW are both set to PRE FADER.
In addition to the fader bay meters, each channel strip - input or output - on the screen includes a small
virtual bar graph - dual on stereo channels - complete with a 0 dB reference point. The source for these
may also be selected as PRE FADER or POST FADER on the METER OPTIONS page as described
above, so the engineer can see both pre fade and post fade signal levels simultaneously. The meters
are at the bottom of the channel strip, immediately above the lower encoders (unless SWAP has been
pressed and they will appear at the top of the screen).
31: Virtual Meters show at the bottom of the Channel Strip.
Meter Options can be found in the USER OPTIONS in the MENU Screen.