Cadac CDC five_02-01-2020_Rev-7.docx
Page. 42 / 78
Connector Details
Analogue Inputs
: 3-pin female XLR connectors. The inputs are electronically balanced and are
suitable for connection of either microphones or line level sources. Input impedance is 1.2 kohms in Mic
Mode, or 10 kohms in Line Mode, Mic or Line mode being selected from the
assigned channel’s Input
Gain panel. The maximum input level is +40 dBu (with pad enabled). When an input connector is
assigned as the input of a channel in Mic mode, 48 V phantom power is available, also switched from
the channel’s Input Gain panel. The connector should be wired as follows:
Pin
Connection
1
Screen
2
Signal ‘hot’ (phase)
3
Signal ‘cold’ (antiphase)
Analogue Outputs
: 3-pin male XLR connectors. The outputs are electronically balanced with a source
impedance of 50 ohms. The maximum output level is + 21 dBu. The connector should be wired as
follows:
Pin
Connection
1
Screen
2
Signal ‘hot’ (phase)
3
Signal ‘cold’ (antiphase)