Cadac CDC five_02-01-2020_Rev-7.docx
Page. 27 / 78
16.
FAD FOL
: When active, the FADER FOLLOW Outputs function allows the operator to use the
faders to control the bus send levels from the currently selected input channel. An input
channel layer must be selected for FADER FOLLOW Outputs to be available. The left-most
channel in the visible set, and busses
1 to 16 will be selected by default: the SEL [3] buttons
select other channels, the left / right SCROLL [26, 27] buttons allow navigation both up and
down the busses. While FADER FOLLOW Outputs is active, the screen display and rotary
encoders continue to be active for input channels.
The
FAD FOL
button activates either FADER FOLLOW or MONITOR FOLLOW depending
which has selected in the USER Option settings.
In MONITOR FOLLOW shortcuts to the busses appear on screen.
6: MONITOR FOLLOW Screen
Selecting one of the busses on screen allows you to control the send to it from every channel.
The faders now become that particular bus send for each channel and the pan section on
screen gives you access to any stereo bus pan.