Cactus Laser Trigger LV5, User Manual

Page: 5 / 40

3
Class 1 laser cannot emit accessible laser radiation
levels in excess of the acceptable emission limit
(AEL) within the inherent design or intended use of
the laser. It does not pose a hazard under normal
operating conditions as designed and intended.
3. Remove protective film on the LV5 Sensor for best
performance.
4. Turn OFF all your equipments (e.g. Cactus units, flash
units, and cameras, etc.) before changing batteries or
making connection. Observe the correct polarities
when changing batteries. There is danger of possible
explosion if batteries are installed incorrectly.
5. Switch off the LV5 and remove batteries during storage.
6. Do not permanently store the product in a high
temperature environment (e.g. under strong direct
sunlight, inside an automobile, near cooking stoves/
ovens).
7. Do not operate the device in the presence of flammable
gases or fumes.
8. The Cactus LV5 should never be submerged in liquid or
exposed to rain unless it is properly protected.
9. Never drop or allow the devices to hit the floor.
10. ONLY use the product as described in the user manual.
Improper use of the product may damage the LV5.
3. Major Specifications
• Working radio frequency: 2.4GHz
• Number of radio channels: 16
• Selectable laser frequencies:
– (1) 500Hz
– (2) 1KHz
• Supported sync speed: Up to 1/1000s
(subject to the camera’s sync speed limitation)