Cactus Laser Trigger LV5, User Manual

Page: 20 / 40

18
Note: The further away the black card is from the Emitter,
the lighter and larger the red dot appears.
Add creative lighting effects to your photos by using
Cactus V5 transceivers and portable flash units. Set one V5
as Transmitter (TX), mount it on the camera’s hot shoe, and
set additional V5 transceiver(s) as Receiver (RX) for
portable flash unit(s).
In this case, set the V5 transceivers used as wireless flash
trigger to a different channel other than what you are
using for the LV5/V5 wireless shutter release.
7.5
Off Camera
Flash with
Cactus V5
4. When the black card reaches the Sensor, take note of the
approximate location of the red dot and adjust the
height and angle of the Sensor to match the same dot.
Remove the black card. If the laser is detected by the
Sensor, the status LED will turn from blinking to
steady.
3. Slowly move the black card away from the Emitter
towards the Sensor.