Cactus Laser Trigger LV5, User Manual

Page: 32 / 40

30
Laser not detected
(assuming the laser beam does hit the Sensor)
SENSOR LED STATUS POSSIBLE CAUSES SOLUTION
NO LED 1. BATTERIES
INSTALLED
INCORRECTLY
• ENSURE CORRECT
POLARITIES WHEN FIT-
TING THE BATTERIES.
RED GREEN ORANGE
BLINKS EVERY 5
SECONDS 2. INSUFFICIENT
BATTERY POWER • REPLACE BATTERIES
IN THE SENSOR AND
RETRY.
TRAP MODE:
GREEN BLINKS EVERY 3
SECONDS
ESCAPE MODE:
ORANGE BLINKS EVERY
3 SECONDS
3. LASER FREQUENCY
MISMATCH • RESET THE SENSOR TO
DETECT THE LASER
FREQUENCY AGAIN.
4. EMITTER & SENSOR
DO NOT PAIR UP • PLACE EMITTER AND
SENSOR WITHIN 1M. ONCE
LASER IS DETECTED,
ADJUST DISTANCE. SEE
SECTION 7.4.
5. WEAK LASER SPOT • OPEN THE LASER
FILTER ON THE EMITTER.
• ATTACH THE HOOD TO THE
SENSOR FOR OUTDOOR
USE.
TRAP AND ESCAPE
MODE:
STEADY RED 6. WEAK LASER SPOT • SEE POINT 5.
7. INTERFERENCE FROM
UNWANTED LIGHT • RE-POSITION EMITTER
OR SENSOR TO AVOID
UNWANTED LIGHT.
• CHOOSE ANOTHER LASER
FREQUENCY.
8. EMITTER AND/OR
SENSOR FALLS OUT
OF TRACK • RE-POSITION EMITTER
AND/OR SENSOR UNTIL
LED TURNS TO STEADY
GREEN.