Cactus Laser Trigger LV5, User Manual

Page: 19 / 40

17
2. Place the Emitter and Sensor at a desirable distance.
Mount the LV5 units securely on light stands or
tripods, and adjust them to similar heights.
(see the image below). Place a black card in front of
the Emitter and a clear red dot appears on the card.
<1m
7.3.2 Multi Shot
1. Follow steps 1-4 outlined in Section 7.3.1 but set
the Sensor to Multi Shot and the camera’s drive mode to
burst/continuous/high speed mode
(refer to your
camera’s user manual for corresponding function key).
2. When the laser is detected by the Sensor again, the
camera’s shutter releases and takes multiple images
until the object blocks the laser.
Outdoor environments have high luminosity level and the
brightness around the LV5 could affect laser detection
between the Emitter and the Sensor. The maximum tested
distance of LV5 under direct sunlight is 20m. To set your
LV5 for outdoor shooting, perform the steps below.
1. Pair up the Emitter and Sensor within 1m by aiming the
laser at the Sensor until you see a steady green LED in
Trap Mode.
7.4
Setting the
LV5 for
Outdoor Use