The WAN Physical Configuration Screen
WPIM-DI Local Management Guide
2-3
The WAN Physical Configuration screen displays the following
information for each WPIM:
WPIM
1-4
Displays configuration information for as many as four WPIMs.
TYPE
Displays the WPIM type.
BRIM #
Displays the BRIM slot in which the WPIM resides.
MODE
Displays the WPIM mode. This field toggles between Primary and
Secondary. In a device such as the BRIM-W6 where two WPIMs are
utilized but only one can be active at a given time, the second WPIM
installed or recognized defaults to Secondary.
ACTIVE
Displays the status of the WPIM. This field displays YES for active
WPIMs and NO for inactive WPIMs.
IFACES
Displays the interfaces available to each WPIM.
2.1.2
WPIM-DI Line Configuration Fields
The line configuration fields displayed on the Physical Configuration
screen shown in Figure 2-1 vary depending on the type of WPIM. The
examples in this Local Management Guide cover the fields available to
the WPIM-DI. Each Cabletron Systems WPIM has a Local Management
Guide that provides specific line configuration guidelines and examples.
