WPIM-DI Local Management Guide
2-1
CHAPTER 2
LOCAL MANAGEMENT
This chapter explains how to configure the WPIM-DI through Local
Management. The
WAN Physical Configuration
screen and the
WAN
Interface Configuration
screen appear as Local Management menu
selections in a host device, when the WPIM-DI is installed into a host
device. The WPIM-DI can be installed directly into a CSX400. Refer to
the appropriate host device technical documentation for instructions about
how to set up and access Local Management.
This chapter contains the following sections:
•
The WAN Physical Configuration Screen, Section 2.1
•
The WAN Interface Configuration Screen, Section 2.2
•
WPIM-DI Configuration, Section 2.3
Read Section 2.1 and Section 2.2 to gain an understanding of the
WPIM-DI Local Management screens. Section 2.3 provides instructions
for setting up the WPIM-DI for full or fractional T-1 in a PPP (LEX or
BNCP) environment, or for configuring the WPIM-DI for Frame Relay.
Navigate through the WPIM Local Management screens by
using the following keyboard commands:
SPACE bar to toggle between selections in a field.
ENTER (RETURN) to implement a selection.
Arrow keys to move up, down or across within the screen.
TIP