Cabletron Systems SmartSwitch 6500, Overview And Setup Manual

Page: 15 / 50

Features
6C110 Overview and Setup Guide 1-7
Power Supply Status Via Local Management
The 6C110 power supply modules report information to the modules
installed in the chassis regarding the present operating status. This
information includes the following:
• Power Supply ID (PS1, PS2)
• Power Supply Status (normal/fault/not installed)
• Power Supply Redundancy Indication (redundant/not available)
• Fan Tray Status (normal/fault/not installed)
Refer to the module specific User’s Guide for instructions on how to
access power supply status information via Local Management.
Auto-Ranging Power Supplies
The 6C110 power supply modules automatically adjust to the input
voltage and frequency. No additional adjustments are necessary.
Hot Swapping
To reduce network downtime, the power supply modules are also hot
swappable. This allows for the removal of one power supply without
powering down the chassis and interrupting network traffic.
The 6C110 Cooling System
The 6C110 features a removable fan tray that is accessible from the front
of the unit. This unit is hot swappable, which allows it to be replaced
without powering down the chassis. The fan tray has one LANVIEW
LED located on the front of the unit. This LED indicates the status of the
fan tray (normal or fault). Refer to
Chapter 2 for a full description of fan
tray LED states and their definitions.
Rack Mountable Chassis
The 6C110 can be mounted into a standard 19-inch (48.26 cm) equipment
rack. The 6C110 chassis has rackmount brackets built into the chassis for
ease of installation.