Cabletron Systems NB30, User Manual

Page: 49 / 88

USING BRIDGE MANAGEMENT OPTIONS
5-19
DSX-1 Port Setup Fields
DSX-1 Channel Assignment
Allows you to enable or disable any combination of the 24 channels on
the T1 connection to the NB30. To do so:
NOTE: When you assign channels on a T1 link, you must set the channels
on both NB30's of a pair to the same settings.
1. Use the Up and Down arrow keys to highlight the desired channel
number.
2. Press Return to toggle the channel between the Enabled or Disabled
condition.
3. Once you have specified the status of each channel, use the arrow keys
to highlight the EXECUTE command at the bottom of the window.
4. Press Return. The channels will be enabled or disabled as desired.
The Activate All Command
This command enables all channels on the T1 link. To do so:
1. Use the Arrow keys to highlight the ACTIVATE ALL command.
2. Press Return. All channels on the T1 link will be enabled, and will
display as such in the DSX-1 Channel Assignment field.
The Deactivate All Command
This command disables all channels on the T1 link. To do so:
1. Use the Arrow keys to highlight the DEACTIVATE ALL command.
2. Press Return. All channels on the T1 link will be disabled, and will
display as such in the DSX-1 Channel Assignment field.