Cabletron Systems NB30, User Manual

Page: 72 / 88

USING BRIDGE MANAGEMENT OPTIONS
5-42
13. Enter the Data field that you want to use as the filter, and press
Return. Be sure that any unused characters are filled with Xs, which
represent any number.
14. After you have filled in the specific field or fields that you want to use
as a filter, highlight the SAVE FILTER command at the bottom of the
screen.
15. Press Return.
Your filter has been enabled and entered in the Special Database. Packets
with the specific Destination and Source Addresses, and Type and Data
fields entering the bridge through the Ethernet Ports will be filtered or
relayed.
5.4.2.3 Deleting Special Database Filters
To delete a Special Database filter:
1. Using the arrow keys, highlight the number (#) of the filter you wish
to delete.
2. Press Return. The Special Database - Delete Filter screen, Figure
5-18, will appear, with the filter you have chosen to delete in the lower
half of the screen.
3. Highlight the DELETE FILTER command at the bottom of the
screen.
4. Press Return. The filter has been deleted. Highlight the RETURN
command at the bottom of the screen to return to the Special Database
- Add Filter screen.