manualshive.com logo in svg

Cabletron Systems NB30, User Manual, Page: 11 / 88

Share
Download
Cabletron Systems NB30 User Manual Download Page 11

 

2-1

 

CHAPTER 2

GETTING STARTED

 

This chapter lists procedures for accessing Local Management for the 
NB30. Information is provided on the necessary terminal and cable 
configurations for connecting a terminal to the console port on the NB30, 
as well as instructions for entering the password.

 

2.1

TERMINAL CONFIGURATION

 

Local Management for the NB30 is accessed through a VT™ 200 or 300 
series or a PRIME™ 200 series terminal, or terminals running emulation 
programs for these series of terminals. The terminal or emulating terminal 
is attached to the port labeled CONSOLE on the bridge.

For instructions on setting up your terminal and the keyboard map, refer 
to your terminal manual.

The terminal configurations must be set as follows, so that the terminal 
can communicate with Local Management for the NB30.

 

2.1.1

VT200 or 300 Series Setup

 

If you have a VT200 or 300 series terminal, press F3 to access the Setup 
Directory.

 

Display Set-up Menu

 

Columns

80 Columns

Controls

Interpret Controls

Auto Wrap

No Auto Wrap

Text Cursor

No Cursor

Summary of Contents for NB30

























































































Reviews:

No comments