MMAC-M5FNB SETUP
Page 3-1
CHAPTER 3
MMAC-M5FNB SETUP
This chapter contains instructions to help you set up Cabletron
Systems’ MMAC-M5FNB. You will not need any special tools or
equipment to set up the MMAC-M5FNB, but you must follow all
guidelines listed in Chapter 2, Installation Requirements and
Specifications.
CAUTION: Only qualified personnel should install or service this unit
and its modules.
3.1
UNPACKING THE MMAC-M5FNB
Before you install the MMAC-M5FNB, you should inspect the unit.
To unpack the MMAC-M5FNB:
1.
Remove the MMAC-M5FNB and fan tray from the shipping box.
Save the shipping box and materials in the event the
MMAC-M5FNB has to be reshipped.
2.
Slide the two foam end caps off the MMAC-M5FNB, and remove
the unit from the protective plastic bag. Set the MMAC-M5FNB
aside in a safe place.
3.
Remove the accessory package and verify that it contains two
mounting brackets, a cable tie tray, and two security bars.
Contact Cabletron Systems Technical Support immediately if any
discrepancy exists.
