INTRODUCTION
Page 1-2
1.2
USING THE MMAC-M5FNB MANUAL SET
Other manuals have been developed for the Repeater/Management
modules and for each MIM that can be installed in your
MMAC-M5FNB. These manuals explain how to install the individual
modules into the MMAC-M5FNB, how to attach cable segments to the
modules, and how to test those segments after they have been
installed. Specifications for all modules are included in each manual.
Additional manuals have been developed on how to use Cabletron
Systems’ Network Control Management software packages.
Each manual in this set assumes that you have a general working
knowledge of Ethernet or IEEE 802.3, 802.5, or FDDI type data
communications networks and their physical layer components.
1.3
GETTING HELP
If you need additional support related to the MMAC-M5FNB, or if you
have any questions, comments, or suggestions related to this manual,
contact Cabletron Systems Technical Support. Before calling, please
have the following information ready:
•
The product type (MMAC-M5FNB), and the product serial
number. The serial number is located on the front panel of the
MMAC, and the product type is on the fan tray label.
You can contact Cabletron Systems Technical Support Department by
any of the following methods:
By phone:
Monday through Friday between
8 A.M. and 8 P.M. Eastern
Standard Time at (603) 332-9400.
By mail:
Cabletron Systems, Inc.
PO Box 5005
Rochester, NH 03867-0505
By CompuServe
®
:
GO CTRON from any ! prompt
