MMAC-M5FNB SETUP
Page 3-2
3.2
SETTING UP THE MMAC-M5FNB
The following sections list the steps necessary to set up your
MMAC-M5FNB, including installing the MMAC-M5FNB in the
desired location, inserting the fan tray, and inserting the power supply
module(s).
3.2.1
Rack Mounting the MMAC-M5FNB
To mount the MMAC-M5FNB in a standard 19" equipment rack:
1.
Using a Phillips head screwdriver, remove the eight screws (item 1,
Figure 3-1, following page) – four on each side of the
MMAC-M5FNB – which are closest to the front of the chassis, and
set them aside.
2.
The rack mount brackets (item 2) provided have two sets of holes:
use the front holes (item 3) to mount the chassis flush with the
equipment rack; use the rear holes (item 4) to mount the chassis
so that it is recessed 3" from the front of the rack. Align the
appropriate four holes on one rack mount bracket with the four
holes from which you removed the screws.
