Cabletron Systems FRM, User Manual

Page: 310 / 396

20-10 Frame Relay Module 4. 0 User G uide, Rev 01
Bridge Port Statistics
Press
[A]
at the Bridge Status Displays Menu to display the configurational and oper-
ational status of all Bridge ports in the node:
Figure 20-8 Bridge Port Status Display
[C],[F],[D],[A]
from Main Menu
To display statistics for the Bridge ports on the above screen, press [F2] . Pressing
[PgUp] or [PgDn] will display other statistics screens (if there are more), and pressing
[F2] will return the display to Figure 20-8.
Bridge Status Displays are described on page 19-21.
Information on the Bridge Port Statistics Display:
●
Type/Format – identifies the interface type (LAN or frame relay) and (if frame
relay) frame format (Native LLC2 or 8023_TB, as configured in the Port
record).
●
DesignatedRoot – is the bridge selected as Root in the spanning tree. The
selection of root is determined by the bridge with the lowest Bridge ID, which
consists of a
Bridge Priority and MAC address.
●
DesignatedBridge – is the bridge connecting to the least-cost path to the root
bridge.
●
DlyExceeded – is the number of frames discarded because of excessive delay.
●
OutFrames – is the number of transmitted frames.
●
InCfgShort – is the number of received Configuration BPDUs (Bridge Protocol
Data Units) that were dropped because they were too short.
●
OutCfgBPDU – is the number of transmitted Configuration BPDUs.
N ode Name=n ode_xyz
Bridge Port S tatus Display
Bridge I d: 0010.00000364439B Root Port: 255
Nu m Type/Format Statu s Bridge State R eceive X mit
0 Ethern et Active D is abled 4294967296 4294967296
1 Token R in g Active Listening 4675561234 4675561234
2 Frm/Nat LLC 2 Active Learning 4561230000 4562222100
3 Frm/8023/TB Active Blocking 4561231100 4561231100
PgUp PgDn F2:More In fo F3:Exit