Cabletron Systems FRM, User Manual

Page: 304 / 396

20-4 Frame Relay Module 4. 0 User G uide, Rev 01
Configuring Port Statistics Thresholds
For each port statistic, you can specify a threshold that, when crossed, causes an alarm
to be sent to the collecting node.
Press [A] at the Statistics Menu. When prompted, enter:
●
Statistic level : P for Port.
●
RLP : 0 on FRM/2/3, 0–2 on FRM. (Default is 0 .)
●
Port : 0–7 . (Default is 0 .)
A menu similar to the following figure will be displayed.
Figure 20-4 Port Statistics Configuration Menu
[E],[A]
from Main Menu
Changing a threshold changes the database value. Press [F7] to write the
change to system memory.
A threshold is either a number or a percentage, depending on the statistic. The valid
range for any statistic is
0–65535. (Default = 0. ) When the measured value for the sta-
tistic crosses the threshold (in either direction), an alarm is generated.
Node N ame= node_xyz
Port Statistics (Th resh old s)
RLP: 0
Port: 1
Databas e System Memory
A R eceived frames/Sec (*10) 0 0
B Trans mitted frames/Sec (*10) 0 0
C R etran frames/Sec (*10) 0 0
D FCS errors/Sec (*10) 0 0
E Logical rejects /S ec (*10) 0 0
F Trans mit error ratio 0 0
G R eceive error ratio 0 0
H % Receive port u tilization 0 0
I % Tran smit p ort utilization 0 0
Option: