Cabletron Systems FRM, User Manual

Page: 252 / 396

16-4 Frame Relay Module 4. 0 User G uide, Rev 01
Community Table Parameters
Name
is a community name, assigned by a network manager.
Access
determines what kind of access community members will have to SNMP messages.
Configuring Trap Routing
The "trap" task allows the SNMP manager to specify one or more IP addresses (up to
sixteen) to which the node's events (alarms) will be sent (as SNMP traps). To con-
figure trap routing, press
[C] at the SNMP Configuration Menu.
Figure 16-3 SNMP Trap Routing Menu
[A],[A],[D],[C]
from Main Menu
To configure an entry, press the corresponding " Seq " (sequence) number. To delete an
entry, select it, then press [E] (and [Y] when asked to confirm). All entries below a
deleted one will move up one in the list.
Table 16-2 Community Table Parameter
Parameter Valid Values Default Value
Name
0–24 characters none
Access Read only, Read/wr ite Read only
Nod e Name=nod e_xyz
Trap R outing
A Seq B Add ress C Enab led D S everity E Delete
1 255.255.255.255 Yes 1
2 123.123.123.123 Yes 1
3 0.0.0.0 No 4
4 0.0.0.0 No 4
5 0.0.0.0 No 4
6 0.0.0.0 No 4
7 0.0.0.0 No 4
8 0.0.0.0 No 4
9 0.0.0.0 No 4
10 0.0.0.0 No 4
11 0.0.0.0 No 4
12 0.0.0.0 No 4
13 0.0.0.0 No 4
14 0.0.0.0 No 4
15 0.0.0.0 No 4
16 0.0.0.0 No 4
Option::