Chapter 5: Local Management
5-30
DLEHF-MA User’s Guide
Source Module [
n] (Selectable)
Allows a selected module [n] to be configured as a source module.
Destination Port [
n] (Selectable)
Allows a selected port [n] to be configured as a destination port.
Destination Module [
n] (Selectable)
Allows a selected module [n] to be configured as a destination module.
Status (Toggle)
Allows the user to add or delete the source/destination modules and ports
selected in the Source/Destination Modules and Ports fields.
Errors (Toggle)
Allows the user to configure the source modules and ports to either send
errored frames and valid traffic to selected destination modules and ports
(ON), or to drop errored frames, and send only valid traffic to the
destination modules and ports (OFF). The default setting of this field is
ON. For information on how to change the default setting, refer to
Section 5.11.2.
5.11.1
Displaying the Source and Destination Entries
There can be more than one Port Redirect Function screen depending on
the number of port redirect entries. Each screen displays up to ten port
redirect entries. If there is more than one screen of redirect entries, the
NEXT and/or PREVIOUS command is displayed at the bottom of the
screen, allowing the user to navigate to the next or previous screen.
For example, with three screens of entries, the NEXT command is
displayed at the bottom of the first screen. In the second screen, the
NEXT and PREVIOUS commands are displayed. In the last screen, only
the PREVIOUS command is displayed.
To display the next screen, use the arrow keys to highlight NEXT. Press
ENTER and the next screen of entries is displayed.
To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries in the previous screen.