Chapter 4: Troubleshooting
4-4
DLEHF-MA User’s Guide
4.2
DELTX-UI LED
The optional DELTX-UI has one LED labeled 10/100. The 10/100 LED
together with the receive LED allows the user to determine the link status
and the operating speed of the Fast Ethernet Interface Module. The
10/100 LED and the Receive (RX) LED are shown in Figure 4-2.
Table 4-2 and Table 4-3 provide a functional description of the
DELTX-UI LED when the RX LED is on or off, respectively.
Figure 4-2
DELTX-UI LED
TX
Off
Port enabled, and no
activity.
1. Ensure that the STA is
enabled and that there is valid
link.
2. Contact your DIGITAL
representative.
Green
Flashing. Indicates activity.
Rate indicates data rate.
None.
Amber
Blinking. Port in standby,
link.
1. Ensure that the port is not
disabled.
2. Contact your DIGITAL
representative for assistance.
Red
Flashing. Indicates
collision rate.
None, unless a high rate of
collisions is occurring. If so,
check network configuration.
Solid. Diagnostic failure.
Contact your DIGITAL
representative.
Table 4-1
LANVIEW LEDs (Continued)
LED
Color
State
Recommended Action
Receive
(RX) LED
2
2
DELTX-UI
10
100
x
=
1
2
10
100 LED
236205