Switch Configuration Screen
DLEHF-MA User’s Guide
5-59
5.18
SWITCH CONFIGURATION SCREEN
The Switch Configuration screen, Figure 5-22, provides the basic setup
options to make a switch operational in your network.
To access the Switch Configuration screen from the Module
Configuration Menu screen, use the arrow keys to highlight the SWITCH
CONFIGURATION menu item and press ENTER. The Switch
Configuration screen, Figure 5-22, displays ports 1 through 8.
The Switch Configuration screen displays only if the
operational mode of the chassis or the DLEHF-MA has been
set to 802.1D SWITCHING or 802.1Q SWITCHING. Refer to
Section 5.7.7 for instructions on configuring the chassis to
operate in this mode and Section 5.15.9 for instructions on
configuring the DLEHF-MA to operate in this mode.
Ports 1 through 4 on the screen represent the optional Fast
Ethernet Interface Modules and HSIMs (Ports 1 and 2
correspond to the Fast Ethernet slots and ports 3 and 4
correspond to the HSIM slots). Ports 5 through 8 represent the
backplane connections that the module has with the
DLM6C-AA chassis. The module has a direct connection to
every other slot in the chassis.