Chapter 5: Local Management
5-8
DLEHF-MA User’s Guide
2.
Enter the Password and press ENTER. The default super-user access
password is “public” or press ENTER.
•
If an invalid password is entered, the terminal beeps and the cursor
returns to the beginning of the password entry field.
•
Entering a valid password causes the associated access level to display
at the bottom of the screen and the Main Menu screen to display.
•
If no activity occurs for several minutes, the Password screen redisplays
and the session ends.
5.4.1
Navigating Local Management Screens
The DLEHF-MA Local Management application consists of a series of menu
screens. Navigate through Local Management by selecting items from the
menu screens.
The DLEHF-MA supports three modes of switch operation. The switching
modes are as follows:
•
802.1D SWITCHING (IEEE 802.1D switching)
•
802.1Q SWITCHING (802.1Q port based VLANs)
The switch operational mode may be set in either the Chassis Configuration
screen (Section 5.7), or the General Configuration screen of the module
(Section 5.15). Depending on the Operational Mode set for the module,
the hierarchy of Local Management screens differs as shown in
Figure 5-4 and Figure 5-5. Refer to the appropriate figure that relates to
the Operational Mode that will be set for the module to see the applicable
Local Management screen hierarchy.
The user’s password is one of the community names specified
in the SNMP Community Names screen. Access to certain
Local Management capabilities depends on the degree of
access accorded that community name. Refer to Section 5.8.
Refer to the Release Notes shipped with the product to verify
which screens are supported in each of the two available
switching modes.