PVC Addendum to the 9A686-04/9A656-04 Configuration Guide
9033126-01
Page 37 of 43
Step 22. Verify the traffic descriptor was properly set for the transmit side of the interface.
This section describes how to verify that the settings created back in
step 21
were properly set. Refer to
Figure 26
.
Figure 26 Verifying the Traffic Descriptor for the Transmit Side of the Interface
Figure 26
contains two callouts, which are described as follows:
A
Displays the MIB command used to view this information (atmVclTransmitTrafficDescrIndex) and the
OID string used to access this command (1.3.6.1.2.1.37.1.7.1.7).
B
Points out that the transmit side of the interface has been properly assigned to use traffic descriptor
index 15.
A
B