PVC Addendum to the 9A686-04/9A656-04 Configuration Guide
9033126-01
Page 42 of 43
•
VPI of the PVC (in this example, 11)
•
VCI of the PVC (in this example, 113)
Therefore, in this example, the information that must be entered is 4099.30301.11.113.30302.11.113.
Once this information has been entered, the PVC MUST be set to integer 4 (createAndGo).
Step 30. Verify the PVC is operational.
This section describes how to verify that the PVC is now operational. Refer to
Figure 31
.
Figure 31 Verifying the PVC is Operational
Figure 31
contains two callouts, which are described as follows:
A
Displays the MIB command used to view this information (atmVclCrossConnectRowStatus) and the OID
string used to access this command (1.3.6.1.2.1.37.1.11.1.13).
B
Points out that the PVC is set to integer 1 (active), which indicates the PVC is now operational.
A
B
