PVC Addendum to the 9A686-04/9A656-04 Configuration Guide
9033126-01
Page 20 of 43
Step 5. Assign the ATM traffic descriptor type.
This section describes how to set an ATM traffic descriptor type for the user defined instance. In this
example, the ATM traffic descriptor “atmNoClpScr”, which signifies a Variable Bit Rate (VBR)
connection, is used. In addition, this connection will have a Sustained Cell Rate (SCR) of 500 cells a
second, with a Peak Cell Rate (PCR) of 1000 cells a second and Maximum Burst Size (MBS) of 75. Refer
to
Figure 9
.
Figure 9 Assigning the Traffic Descriptor Type
Figure 9
contains two callouts, which are described as follows:
A
Displays the MIB command used to view this information (atmTrafficDescrType) and the OID string
used to access this command (1.3.6.1.2.1.37.1.5.1.2).
B
Points out the user-defined Instance (value 15), and how the Instance is about to be set to “atmNoClpScr”
and the OID string that this setting uses (1.3.6.1.2.1.37.1.1.5). This OID string represents a VBR
connection with no Cell Loss Priority (CLP).
A
B
