PVC Addendum to the 9A686-04/9A656-04 Configuration Guide
9033126-01
Page 21 of 43
Step 6. Verify the ATM traffic descriptor type has been assigned to the instance.
This section describes how to verify that the traffic descriptor type has been set, before continuing with
the configuration. Refer to
Figure 10
.
Figure 10 Verifying the Traffic Descriptor Type Has Been Assigned to the Instance
Figure 10
contains two callouts, which are defined as follows:
A
Displays the MIB command used to view this information (atmTrafficDescrType) and the OID string
used to access this command (1.3.6.1.2.1.37.1.5.1.2).
B
Points out that the user-defined Instance (value 15) has been properly set to use the traffic descriptor type
“atmNoClpScr”. In addition, the OID string used by this traffic descriptor (1.3.6.1.2.1.37.1.1.5) is
displayed.
B
A
