PVC Addendum to the 9A686-04/9A656-04 Configuration Guide
9033126-01
Page 35 of 43
Figure 23
contains two callouts, which are described as follows:
A
Displays the MIB command used to view this information (atmVclReceiveTrafficDescrIndex) and the
OID string used to access this command (1.3.6.1.2.1.37.1.7.1.6).
B
Points out that the receive side of this end of the PVC (30301, or port 1 of ANIM 3 of the module
installed in slot 3) is about to be set to the traffic descriptor created previously (integer 15).
Step 20. Verify the traffic descriptor was properly set for the receive side of the interface.
This section describes how to verify that the settings created back in
step 19
were properly set. Refer to
Figure 24
.
Figure 24 Verifying the Traffic Descriptor for the Receive Side of the Interface
Figure 24
contains contains two callouts, which are described as follows:
A
Displays the MIB command used to view this information (atmVclReceiveTrafficDescrIndex) and the
OID string used to access this command (1.3.6.1.2.1.37.1.7.1.6).
A
B
