Configuring the Module in a DEChub ONE or DEChub ONE-MX 5-7
[4] Configure IP
[4] Configure IP
This option provides you with IP configuration selections.
The following example shows the dialog associated with this menu:
The following pages describe the IP Configuration options:
Topic
Page
[1] Set SNMP Read/Write Community
5-8
[2] Add SNMP Trap Addresses
5-9
[3] Delete SNMP Trap Addresses
5-10
[4] Set In-Band Interface IP Address
5-11
[5] Set Out-of-Band Interface IP Address
5-12
[6] Enable/Disable BootP
5-15
Enter selection : 4
MS FE Hub 924TX
=========================================================
IP CONFIGURATION
[1] Set SNMP Read/Write Community
[2] Add SNMP Trap Addresses
[3] Delete SNMP Trap Addresses
[4] Set In-Band Interface IP Address
[5] Set Out-of-Band Interface IP Address
[6] Enable/Disable BootP
[7] Return to Main Menu
=========================================================
Enter selection number : [n] <Return>
