[6] Downline Upgrade
4-24 Configuring the Module in a DIGITAL MultiSwitch 900
When the DLU Process is Complete
When the DLU process is complete, the following events occur:
•
The module exits from the DLU process.
•
The module begins the execution of the new firmware image.
•
The Module OK LED turns on.
•
The module becomes fully operational.
•
The Hub Manager status display shows the following message:
Verifying the Upgrade
After the DLU process has completed, you can verify the firmware upgrade by
completing the following steps:
Step
Action
1
Select
Option [3] Show Current Settings
from the
MS
FE Hub 924TX INSTALLATION MENU.
2
Verify that the correct firmware version has been loaded.
3
Press <Return> for the Main Menu.
MS FE Hub 924TX
unknown
