How to Access RMON Groups
F-4 Accessing and Configuring RMON Groups
How to Access RMON Groups
This section provides you with procedures that describe how to access the RMON
Groups.
Accessing Statistics and History
To access the Statistics and History groups, you must use the clearVISN MultiChassis
Manager as follows:
For additional Statistics and History information refer to online help.
Accessing Alarms and Events
This section describes how to set up a condition to be monitored (an alarm) and an
event to be generated once that condition has occurred. You use an SNMP network
manager to set up conditions and events. For a more complete description of the
alarmTable and eventTable, refer to
RFC 1757
: S. Waldbusser, “Remote Network
Monitoring Management Information Base”, 02/10/1995.
The event group consists of the eventTable and the logTable. The alarmTable contains
configuration entries that define a variable, polling period, and threshold parameters.
If an entry is found to have crossed the threshold value, an event is generated that is
processed as specified by your entries in the eventTable. Thus, the eventTable controls
the generation and notification of events from the device.
RMON Group
To Access/Use these Groups ...
Statistics and History
Use the clearVISN MultiChassis Manager
Alarms and Events
Use any SNMP network manager
Step
Action
1
Run the clearVISN MultiChassis Manager.
2
Double-click on the DECrepeater 924FE module. (The summary screen
displays the module’s summary.)
3
Click on the RMON button to display the Statistics screen.
4
Click on the HISTORY button on the Statistics screen.
