Configuring the Module in a DIGITAL MultiSwitch 900 4-7
[3] Show Current Settings
[3] Show Current Settings
This option shows the module’s current settings. If the module is being configured for
the first time, some fields will be blank. The software (SW) version number reflects
the current version. The hardware ID and ROM (boot) code versions are displayed.
The following example shows the display associated with this option. Entries in this
display are defined following the screen.
Line
Field
Description
MS FE Hub 924TX
The name of the module.
HW=B
The hardware version.
RO=V1.0
The boot ROM version.
SW=V1.0
The current software version number.
SysUpTime
00:31:18
Indicates how long the system has been up
since the last reset.
8 resets
The reset count at the time that the last
Downline Upgrade was performed.
Enter selection : 3
MS FE Hub 924TX - slot 8
====================================================================
MS FE Hub 924TX, HW=B,RO=V1.0,SW=V1.0
SysUpTime : 6 days 00:03:18 8 resets
SNMP Read/Write Community : public98
SNMP Trap Addresses : 16.7.88.156
Status of Last Downline Upgrade : TFTP Read
00:02:55 7 resets
Transfer Complete
BootP : Disabled
Interface IP Address Subnet Mask Def.Gateway Other Info
Ethernet Port 16.20.216.91 255.0.0.0 16.21.0.1 08-00-2B-A6-0E-05
Press Return for Main Menu...
MS FE Hub 924TX - slot 8
1
2
3
4
====================================================================
====================================================================
====================================================================
1
2
