94
cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Rewind Guide Plate
The rewind guide plate is delivered with Apollo 1/300RS, Apollo 2/300R or
the Internal Rewinder M.
The rewind guide plate for printers with internal rewinder allows to rewind
small print jobs inside the printer. The maximum rewind diameter depends on
the remaining size of the media supply roll.
It is limited by the possible contact of both, the rewind roll and supply roll.
Fig. 13 l Mounting the rewind guide plate
The Apollo is delivered with a mounted tear-off plate (4).
For internal rewinding, the tear-off plate has to be replaced with the rewind
guide plate (3) :
1. Turn the lever (1) counter-clockwise until it stops.
2. Remove the tear-off plate (4) from the mounting holes (2).
3. Slide the rewind guide plate (3) into the mounting holes (2).
4. Turn the lever (1) clockwise until it stops.
Mounting the Rewind Guide Plate
3
4
1
2
Summary of Contents for THARO Apollo 1 Series
