CAB THARO Apollo 1 Series, Operator'S Manual

Page: 62 / 139

62 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.
Printhead Position
The "Printhead position" parameter defines the location of the print image on
the label in x- and y-direction. The parameter should only be altered if you are
using the same label formats on several printers, and you find the print image
located differently on the labels when they were printed on another printer.
X-Offset
With this parameter the location of the print image can be shifted across to the
label path. It is possible to set a shifting untiI .33 in (8.4 mm) outward in the
Setup.
NOTICE !
The value of X-offset cannot be greater than the difference of the
printhead width and the defined label width in software. A value greater
than the difference will be ignored and the actual difference will be used
in place.
The setting of a negative X-offset value (shifting the print image inward) is not
possible.
Y-Offset
With this parameter the location of the print image can be shifted in the
direction of the label path (range from -.39 to +.39 or -9.9 mm to +9.9 mm).
When the offset values are positive the printing in the direction of the label path
starts later.
NOTICE !
Changing the Y-offset also effects the peel position and cut position as
well. It will be necessary to readjust the values for the peel and cut
positions using the previous value +/- the printhead position value.
Adjustments for various print jobs may also be carried out via software which
provides an additional offset value. There are additional offset values in x- and
y-direction.
Any front panel value and software command value are totaled together for
printing.
The current field to be changed is flashing.