18
18
Measuring point (RP S) of support air
3
2
1
MP S
Use a manometer with a measurement area -7 to 7 bar for
measurement the pressure.
MP S: support air (reference value 2 bar)
1. Remove cover and connect the manometer on RP S.
- Tube (2) from valve block to blow tube connector.
- Fitting (3) on the blow tube
2. Activate the valve manually with open compressed air
supply and pressing of micro switch (1) to measure the
pressure.
3. As and when required adjust it on support air throttle valve
"support air" .
4. Mount cover again.
Fig. 15
Reading points to measure the pressure
!
Attention!
After pressure measurements, connect all component exactly and check it.
