20
20
6.4
Adjust the speed of the swing cylinder
1
2
B
A
Fig. 17
Throttle valves on the swing cylinder
To adjust the speed of the cylinder movements use the throttle valves 1 and 2 on the swing cylinder. Over the throttle
valves will controlled the outflow of the pressure air.
Setting screw (1) turning clockwise for a slowly movement of the pad assembly in direction labeling position (B).
Setting screw(1) turning counterclockwise for a faster movement of the pad assembly in direction labeling position
(B).
Setting screw (2) turning clockwise make the movement of the pad assembly in direction start position (A) slowly
Setting screw (2) turning counterclockwise make the movement of the pad assembly in direction labeling position
(A) faster.
!
Attention!
The time for the downward movement of the pad may not exceed 2 seconds.
Otherwise the error message "
Lower position
" will appear.
