9
4
Replacing Assembly Units
Removing the printhead
1. Lift the printhead.
2. Remove labels and transfer ribbon from the printer.
3. Lightly keep printhead mounting bracket (8) on the print roller, screw out screw (7) with the Allen key (9) and
remove screw and washer.
4. Swivel printhead mounting bracket (8) upward.
5. Remove printhead (1) from the printhead mounting bracket (8) if necessary.
6. Loosen both plug connections (2, 3).
Installing the printhead
1. Attach plug connections (2, 3).
2. Position printhead (1) in printhead mounting bracket (8) in such a way that the pins (6) are secured in the corre-
sponding holes in the printhead mounting bracket (8).
3. Lightly keep printhead mounting bracket (8) on the print roller and check for correct positioning of the printhead in
the mounting bracket (8).
4. Insert screw (7) with washer and tighten it with the Allen key (9).
5. Reload labels and transfer ribbon.
4.1.2
Replacing the Printhead PX6
2
3
5
4
1
4
1 Printhead
2 Plug connection
3 Plug connection
4 Threaded hole
5 Printing line
Fig. 5
Structure of the printhead PX6
!
Attention!
The printhead can be damaged by static electricity discharges and impacts!
Ground your body, e.g. by wearing a grounded wristband.
Do not touch contacts on the plug connections (2, 3).
Do not touch printing line (5) with hard objects or your hands.
