manualshive.com logo in svg

Cab Technology PX Series, Service Manual

Share
Download
Cab Technology PX Series Service Manual Download Page 14

14

14

4 

Replacing Assembly Units

4.4 Replacing 

Label Sensor 

i

Notice! 
Soiling of the label sensor can also cause malfunctions. 

 

Before replacing the label sensor, check whether it is soiled and clean it if necessary.  

 

3.2 on page 7 Cleaning the label sensor.

Danger!

Risk of death via electric shock!

 

Before opening the housing cover, disconnect the device from the mains supply and wait at lease one 
minute until the power supply unit has discharged.

3

1

2

3

4

5

Fig. 12 

Replacing the label sensor

Removing the label sensor

1.  Unplug the printer from the electrical outlet and remove the cover of the printer 

 2.2 Cover dismount / mount.

2.  Remove the material from the printer.

3.  Disconnect the cable (4) from the connector (5) of the label sensor (3) .

4.  Loosen screw (2) with the Allen key (1).

5.  Push the label sensor (3) in arrow direction and pull it out.

Installing the label sensor

1.  Move new label sensor (3) against the arrow direction in the former position. 

2.  Connect cable (4) with connector (5) .

3.  Mount cover and restore all connections.

4.  Adjust label sensor 

 Operator's Manual.

5.  Align the label sensor 

 Configuration Manual.

6.  Tighten screw (2) .

Summary of Contents for PX Series







































Reviews:

No comments

Brands by name

Popular brands

Load more brands