6
6
2 Preparation
2.1
Tools
Do not use any worn of damaged tools.
Only use tools and testing devices that are suitable for the task at hand.
cab special tools:
•
Test collar for transfer ribbon winder (cab item number: 5534199)
•
Distance caliber 0,1 mm (cab item number: 5961064)
Standard tools:
•
Torx screwdriver TX 20
•
Hexagon electronic screwdriver 1,5 mm
•
Hexagon key 2,5 mm (on print module)
•
Phillips-head screwdriver, size 1
•
Precision circlip pliers A0
•
Precision circlip pliers A1
•
Hexagon socket spanner 5
•
Hexagon socket spanner 5,5
•
Cylindrical dynamometer (spring scale), 0 - 10 N
•
Digital multimeter
2.2
Removing and Installing the Backside Cover
!
Attention!
The backside cover or cables can be damaged via careless handling.
Move cable out of the risk area.
Put cover into the guiding complete.
2
1
2
Fig. 1
Removing and Installing the Backside Cover
Dismount cover :
1. Loosen screws (2).
2. Move cover (1) in arrow direction.
Mount cover :
1. Move cover (1) against arrow direction on the device.
2. Make sure that all cables are out of the risk area at the edges of cover.
3. Move the cover (1) complete in the circumferential guiding.
4. Fix cover (1) with screws (2) and tighten the screws.
