10
10
4
Replacing Assembly Units
3
1
4
2
6
6
8
7
4
Fig. 6
Replacing the printhead PX6
Removing the printhead
1. Lift the printhead.
2. Remove labels and transfer ribbon from the printer.
3. Lightly keep printhead mounting bracket (7) on the print roller and loosen screws (6) with the Allen key (8).
4. Swivel printhead mounting bracket (7) upward.
5. Remove printhead from the printhead mounting bracket (7) if necessary.
6. Loosen both plug connections (2, 3) on the printhead.
7
9
9
10
6
10
6
4
Fig. 7
Installing the printhead PX6
Installing the printhead
1. Attach plug connections (2, 3).
2. Swing the adjustment elements (10) sidewards to uncover the slots (9) in the printhead carriage.
3. Put in the printhead into the printhead carriage and swing down the printhead assembly by hand and hold it.
4. Position the printhead in such a way that the threaded holes (4) of the printhead are centered into the slots (9) of
the printhead carriage (7).
5. Swing back the adjustment elements (10) to the home position.
6. Insert and tighten the screws (6).
7. Reload labels and transfer ribbon.
