C2R Colibri 5 30-001, User Manual

Page: 61 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved
61
Rev. C
When Check Character is set to Validate and Transmit , the imager only reads Code 39 bar
codes printed with a check character, and will transmit this character at the end of the scanned
data. Default = No Check Character.
Code 39 Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description
(page 58) for additional information. Minimum and Maximum lengths = 0-48. Minimum Default =
0, Maximum Default = 48.
Code 39 Append
This function allows the imager to append the data from several Code 39 bar codes together
before transmitting them to the host computer. When this function is enabled, the imager stores
those Code 39 bar codes that start with a space (excluding the start and stop symbols), and does
not immediately transmit the data. The imager stores the data in the order in which the bar codes
are read, deleting the first space from each. The imager transmits the appended data when it
reads a Code 39 bar code that starts with a character other than a space. Default = Off.
Code 32 Pharmaceutical (PARAF)
Code 32 Pharmaceutical is a form of the Code 39 symbology used by Italian pharmacies. This