C2R Colibri 5 30-001, User Manual

Page: 64 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved.
64 64
Rev. C
Code 93
Default
Code 93 Enabled
Code 93 Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description
(page 58) for additional information. Minimum and Maximum lengths = 0-80. Minimum Default =
0, Maximum Default = 80.
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data received does not
display with the proper characters, it may be because the bar code being scanned was created
using a code page that is different from the one the host program is expecting. If this is the case,
scan the bar code below, select the code page with which the bar codes were created (see Code
Page Mapping of Printed Bar Codes on page 159), and scan the value and the
Save bar code
from the Programming Chart on the inside the back cover of this manual. The data characters
should then appear properly.