C2R Colibri 5 30-001, User Manual

Page: 19 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved
19
Rev. C
Chapter 2 - Getting Connected
Plug and Play
Plug and Play bar codes provide instant engine set up for commonly used interfaces.
Note:
After you scan one of the codes, power cycle the host terminal to have the interface in
effect.
RS-232
The RS-232 Interface bar code is used when connecting to the serial port of a PC or terminal. The
following RS-232 Interface bar code also programs a carriage return (CR) and a line feed (LF)
suffix, baud rate, and data format as indicated below:
Option Setting :

Baud Rate 115200 bps

Data Format 8 data bits, no parity bit, 1 stop bit
RS-232 Interface
USB HID
Scan the following code to program the OEM Engine for USB HID bar code imagers. Scanning
this code changes the terminal ID to 131.
USB HID Bar Code Imager
USB COM Port Emulation
Scan the following code to program the OEM Engine to emulate a regular RS232-based COM
port. If you are using a Microsoft® Windows® PC, you will need to download a driver from the
C2R Technologie website (www.c2r-technologie.com ) The driver will use the next available COM
port number. Apple® Macintosh computers recognize the engine as a USB CDC class device
and automatically use a class driver. Scanning the code below changes the terminal ID to 130
USB Com Port Bar Code Imager