- 3 -
Product Structure Characteristic
Press sample by internal mode, more wide-ranging , more convenient and more efficient.
Adopt pressure sensor to collect pressure signal and control action and pressure by intelligent
logic controller instead of traditional electro connecting pressure gauge, so that the machine can
work more reliably and get longer service life.
Controll action program by PLC , more convenient and more reliable.
With specific programs of slow pressurization and slow mould-release, the products are
favorable to ensure acceptance rate of sample-press, improve sample quality of sample-press.
It makes boric acid press samples more convenient by improved boric acid mould structure and
perfect action program.
The integrated hydraulic pipeline module with special design not only makes assembly more
convenient, but also reduces the chance of oil leakage.
The cover plate of oil tank makes the action noise between oil pump and solenoid valve more
little by adding the thickness.
Adopt solid state module integrated by silicon controlled instead of traditional contactor.It avoids
all kinds of faults caused by frequent motor start and then improves the service life of this part
effectively.
All control power supplies adopt low voltage 24V, more safety.
Compact structure, cover small area.
Structure
1. Hydraulic unit
2. Operating panel
3. Pressure gage
4. Swing arm
5. Adjustable bolt
6. Press mould
4
3
2
1
5
6
Fig.1 Front of the unit
